A balcony weather station for under forty euros
I wanted to know how much cooler my balcony really is than the forecast says. The answer turned out to be "not much", but the station has been running since spring.
Parts
- ESP32 development board — 8 €
- BME280 breakout for temperature, humidity and pressure — 6 €
- small IP65 junction box — 5 €
- 3D-printed radiation shield, about 3 € of filament
- an old USB charger and a long cable
With shipping it came to a little under forty euros.
How it works
Every five minutes the board wakes up, takes a reading, sends it over Wi-Fi to a tiny server at home and goes back to sleep. The server stores everything in one table and draws a chart I look at far too often.
The lesson: sea air
My balcony is a few hundred metres from the sea. After two months the first sensor started drifting, and on calm nights the humidity stuck at 100%. The second one got a coat of conformal coating on the board (not over the sensor's opening) and a shield that keeps the spray off. It has been fine since July.
Data
Raw readings for October 2026, every five minutes: balcony-2026-10.csv (CSV, about 330 KB). Columns: time in UTC, temperature in °C, relative humidity in %, pressure in hPa. Use it for whatever you like.